To Next PageTo Next Page
Need help?Do you have a question about the NEC M403H and is the answer not in the manual?
General| Native aspect ratio | 16:9 |
|---|---|
| Projection distance | 0.74 - 14.08 m |
| Vertical scan range | 50 - 120 Hz |
| Horizontal scan range | 15 - 100 kHz |
| Projection technology | DLP |
| Supported aspect ratios | - |
| Contrast ratio (typical) | 10000:1 |
| Screen size compatibility | 30 - 300 \ |
| Projector native resolution | 1080p (1920x1080) |
| Keystone correction, vertical | -30 - 30 ° |
| Keystone correction, horizontal | -25 - 25 ° |
| Focus | Manual |
| Throw ratio | 1.2 - 2.1:1 |
| Zoom capability | Yes |
| Focal length range | 18 - 30.6 mm |
| Aperture range (F-F) | 2.4 - 3.2 |
| Lamp power | 270 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Lamp power (economic mode) | 162 W |
| Service life of light source | 5500 h |
| Service life of light source (economic mode) | 8000 h |
| Analog signal format system | NTSC, NTSC 4.43, PAL, PAL 60, PAL M, SECAM |
| Supported graphics resolutions | 640 x 480 (VGA), 720 x 480, 720 x 576, 800 x 600 (SVGA), 832 x 624, 1024 x 768 (XGA), 1152 x 864 (XGA+), 1152 x 870, 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 1280 x 800 (WXGA), 1280 x 960, 1360 x 768 (WXGA), 1366 x 768, 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA), 1600 x 900, 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA) |
| DVI port | No |
| Audio (L/R) in | 1 |
| USB connector type | USB Type-A, USB Type-B |
| HDMI connector type | Full-size |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Maximum digital resolution | 1920 x 1200 pixels |
| Noise level | 30 dB |
| Certification | CE; EAC; Gost-R; TÜV GS |
| RMS rated power | 20 W |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | White |
| Market positioning | Portable |
| Cable lock slot type | Kensington |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 335 W |
| Power consumption (standby) | 0.4 W |
| Power consumption (typical) | 278 W |
| Power consumption (economy mode) | 246 W |
| Power consumption (network standby) | 2.9 W |
| Storage temperature (T-T) | -10 - 50 °C |
| Operating temperature (T-T) | 5 - 40 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Sustainability certificates | RoHS |
| Cables included | AC, VGA |
| Remote control type | IR |
| Harmonized System (HS) code | 85286200 |
Weight and Dimensions| Depth | 291.3 mm |
|---|---|
| Width | 367.9 mm |
| Height | 107.5 mm |
| Weight | 3700 g |
Outlines the step-by-step process for setting up and projecting an image.
Explains how to connect the computer and power cord to the projector.
Details the procedure for powering on the projector.
Describes how to select the desired input source for the projector.
Guides on adjusting image size, position, zoom, and focus.
Explains how to manually correct image distortion using keystone adjustment.
Details the steps required to properly turn off the projector.
Guide to physically setting up the projector and connecting sources.
Procedures for cleaning the projector's lens and cabinet.
Detailed instructions on how to safely replace the projector lamp.
Helps diagnose and resolve common projector issues and indicator messages.
Provides detailed technical specifications for all projector models.
