NEC ME401X - Page 110

99
6. Installation and Connections
ConnectionExample(3)[INFRASTRUCTURE]
Connecttheprojectortowired/wirelessLANviawirelessLANaccesspoint.
Wired LAN
Wireless access point
1. ConnectacomputertotheprojectorviawiredLAN.(→ page 96)
2. Usethecomputer’sbrowsertodisplaytheprojector’sHTTPserver.(→ page 36)
3. UseanHTTPservertosetthewirelessLAN.(→ page 40)
 Selecteither[SIMPLEACCESSPOINT]or[INFRASTRUCTURE]for[WIRELESS]in[SETTINGS]of[NETWORK
SETTINGS]andthenperformdetailsettingsin[SETTING].
4. Click[APPLY]toconnecttothewirelessLAN.
NOTE:
• TousetheHTTPserverfunction,theprojectormustbeconnectedtoanetwork.First,connecttheprojectortoanetworkbythe
wiredLANandthenperformrequiredsettingsforthewirelessLANontheHTTPserver.
• Ifnetworkconictisoccurred,theSTATUSIndicatorstartstoblinkinorange.Inthiscase,changetheIPaddress.
IfyouwanttochangethewirelessLANsettingontheprojectoraftersettingitontheHTTPserver,performsetting
changeontheon-screenmenu.(→page79)