NEC ME423W - 10 Appendix; ❶ Troubleshooting; Feature of each Indicator; Indicator Message (Status Message)

90
10. Appendix
❶ Troubleshooting
This section helps you resolve problems you may encounter while setting up or using the projector.
Feature of each indicator
①
②
③
① POWER indicator
This indicator informs the power status of the projector.
② STATUS indicator
This indicator lights/blinks when a button is pressed while the
CONTROL PANEL LOCK function is utilized, or while performing the
specific operations.
③ LAMP indicator
This indicator informs the state of lamp, usage time of the lamp, and
the status of ECO MODE.
Indicator Message (Status message)
POWER STATUS LAMP Projector status
Power is off
Off Off Off
Standy(Normal)
Orange (Blink*
2
) Off Off
Standy(Network)
Orange Off Off
Standy(Sleep)
Orange (Blink*
1
) Off Off
Cooling
Green (Blink*
4
) Off Off
Green
Off Off
Power Save Standy
Lamp ON(Lamp Normal)
Blue Off Green
Lamp ON(Lamp ECO)
Blue Off Green (Blink*
3
)
Blue (Blink*
4
)
Off Off
Warm Up
*1 Repetition to light on for 1.5 seconds / off for 1.5 seconds
*2 Repetition to light on for 1.5 seconds / off for 7.5 seconds
*3 Repetition to light on for 2.5 seconds / off for 0.5 seconds
*4 Repetition to light on for 0.5 seconds / off for 0.5 seconds