11
2. Projecting an Image (Basic Operation)
❸ Turning on the Projector
1. Remove the lens cap.
Press and hold both ends of the lens cap and pull it toward
you.
2. Press the (POWER) button on the projector cabinet
or the POWER ON button on the remote control.
The POWER indicator will blink and the projector will
become ready to use.
TIP:
• When the message “PIN code” is displayed, it means that the
[SECURITY] feature is turned on.
(→ page 49)
After you turn on your projector, ensure that the computer
or video source is turned on.
(→ page 90)
Standby Blinking Power On
Blinking orange light Blinking blue
light
Steady blue
light
To Next Page
Loading...
