NEC ME423W - 2. Projecting an Image (Basic Operation); Flow of Projecting an Image

9
This section describes how to turn on the projector and to project a picture onto the screen.
❶ Flow of Projecting an Image
Step 1
• Connecting your computer / Connecting the power cord (→ page 10)
Step 2
• Turning on the projector (→ page 11)
Step 3
• Selecting a source (→ page 12)
Step 4
• Adjusting the picture size and position (→ page 13)
• Correcting keystone distortion [KEYSTONE] (→ page 16)
Step 5
• Adjusting a picture and sound
- Optimizing a computer signal automatically (→ page 17)
- Turning up or down volume (→ page 18)
Step 6
• Making a presentation
Step 7
• Turning off the projector (→ page 18)
Step 8
• When Moving the Projector (→ page 19)
2. Projecting an Image (Basic Operation)