23
4. Using the VIEWER
The termination of memory viewer
The slide show mode in the USB-A menu is set to a special setting ,all images in the same folder can play automatically.
1) Press
button to select , displayed in the left corner of the screen.
2) Press <ENTER > button.
3) Unplug the USB memory directly.
NOTE:
• Only USB memory up to FAT32 (32GB) can be read.
• When you insert a USB memory, please make sure insertion direction to avoid damaging the port.
• Please note the following points when inserting and removing USB memory:
a. The indicator flashes,when the USB memory insert into the projector or the projector is reading data.do not remove the USB memory
When the light is flashing.
b. If you use a USB memory device without indicator, the projector will not recognize when reading data. Please close its browse function
on and turn off the projector , then remove the USB memory.
c. Do not insert and remove USB memory frequently. Then remove it after the installation of at least 5 seconds. After removing at least 5
seconds and then reinsert it.
d.Due to the file format, some pictures cannot display thumbnails.
Precautions on processing and storage of USB memory
• If smoke or produce abnormal smell, close the external device and contact the dealer.
• Do not put foreign matter or metal items in the USB port. Static electricity may cause data loss or data damage.
To Next Page
Loading...
