79
7. Installation and Connections
1. Connect a computer to the projector via wired LAN. (→ page 57)
2. Use the computer’s browser to display the projector’s HTTP server. (→ page 61)
3. Use an HTTP server to set the wireless LAN. (→ page 57)
NOTE:
• To use the HTTP server function, the projector must be connected to a network. First, connect the projector to a network by the
wired LAN and then perform required settings for the wireless LAN on the HTTP server.
• Data transmission between wireless LAN and wired LAN is not possible.
If you want to change the wireless LAN setting on the projector after setting it on the HTTP server, perform setting
change on the on-screen menu.(→ page 57)
To Next Page
Loading...
