NEC MT1075/MT1065 User Manual

Portable Projector
MT1075/MT1065
User’s Manual
English
Deutsch
Français
Italiano
Español
Svenska

NEC MT1075/MT1065 Specifications

General

Contrast Ratio	2000:1
Resolution	1024 x 768 (XGA)
Keystone Correction	Vertical ±30°
Input Terminals	HDMI, VGA, Composite Video, S-Video
Output Connectors	VGA Out
Aspect Ratio	4:3 (Native), 16:9 (Compatible)
Projection Size	30" to 300"
Brightness	4000 lumens

Summary

Important Information

Safety Cautions

General precautions for safe operation of the projector.

RF Interference

Information regarding FCC regulations and potential interference.

Important Safeguards

Key safety instructions to ensure long life and prevent hazards.

Fire and Shock Precautions

Detailed safety measures to prevent fire and electrical shock hazards.

What's in the Box?

List of all components included in the projector package.

Introduction

Projector Introduction

Overview of the MT1075/MT1065 projector and its features.

About This User's Manual

Guidance on how to effectively use the user manual.

Projector Components

Attaching the Lens Cap

Instructions for attaching the lens cap to the projector.

Carrying the Projector

Guidelines on how to safely carry the projector.

Remote Control Features

Top Features Overview

Highlights key features and functions of the projector.

Remote Control Buttons

Detailed explanation of the functions of each button on the remote control.

Projector Terminals

Terminal Panel Features

Description of all available input and output connectors on the projector.

Projector Input/Output Ports

Detailed description of each terminal on the projector panel.

Remote Control Details

Part Names of the Remote Control

Identification of all parts and buttons on the remote control.

Remote Control Buttons Functionality

Detailed description of each button's function and operation.

Remote Control Setup and Operation

Battery Installation

Instructions for inserting batteries into the remote control.

Remote Control Precautions

Important handling and usage guidelines for the remote control.

Wireless Remote Control Range

Information on the effective range and angle for wireless remote use.

Wired Remote Control Operation

How to connect and use the remote control via a wired connection.

Installation and Connections

Setting Up the Screen and Projector

Guidance on positioning the projector and screen for optimal setup.

Selecting a Location

Advice on choosing an appropriate location for the projector.

Throw Distance and Screen Size

Tables and diagrams for projector-to-screen distance and size.

Making Connections

Connecting PC or Macintosh Computer

Instructions for connecting computers (PC/Mac) to the projector.

DVI Digital Signal Connection

Specific steps for connecting a DVI digital signal.

Connecting SCART Output (RGB)

Steps for connecting SCART output from video equipment.

Connecting an External Monitor

How to connect an external monitor for simultaneous viewing.

Connecting Your DVD Player

Instructions for connecting DVD players with component or video output.

Connecting VCR or Laser Disc Player

How to connect VCRs, laser disc players, or document cameras.

Connecting the Power Cable

Steps for connecting the projector to a power source.

Projecting an Image (Basic Operation)

Turning on the Projector

Step-by-step guide to power on the projector.

Source Selection and Picture Adjustment

Selecting Computer or Video Source

How to choose the input signal source for projection.

Adjusting Picture Size and Position

Steps to adjust image size and center it on the screen.

Adjusting the Tilt Foot

How to use the tilt feet to set the projector's angle.

Correcting Image Distortion (3D Reform)

Keystone Correction (3D Reform)

How to correct trapezoidal distortion using 3D Reform feature.

Using Auto Focus

Guide to automatically adjust the projector's focus.

Picture and Sound Adjustments

Optimizing RGB Picture (Auto Adjust)

How to automatically fine-tune the RGB image quality.

Adjusting Volume

How to control the projector's audio output volume.

Using the Laser Pointer

Instructions for activating and using the laser pointer feature.

Projector Setup and Operation

Setting the Function Switch

How to set the projector's function switches, including laser control.

Turning off the Projector

Proper procedure for powering down the projector.

Convenient Features

Remote Mouse Function

How to use the remote control as a computer mouse.

Switching Operation Modes

How to switch between projector and computer control modes.

Auto 3D Reform

Executing Auto 3D Reform

Step-by-step guide to activate and perform Auto 3D Reform.

Image and Pointer Functions

Turning Off Image and Sound

How to temporarily mute the image and audio output.

Freezing a Picture

How to pause and resume the projected image.

Using the Pointer

How to use various pointer icons for presentations.

Enlarging and Moving Picture

How to zoom in, move, and reset the projected image.

Getting On-line Help

Accessing the projector's integrated help system.

USB Functions

Using a USB Mouse

Connecting and operating a USB mouse with the projector.

USB HUB Function

Using the USB port to connect multiple devices like scanners.

Customizing Projector Display

Changing Background Logo

How to set a custom logo or image as the projector background.

Making Freehand Drawings (ChalkBoard)

Using the ChalkBoard feature for on-screen drawing.

USB Memory Device Support

Using USB memory devices and card readers with the projector.

Using the Viewer

Viewer Function Features

Overview of the Viewer's capabilities for presentations and image viewing.

Inserting and Removing a PC Card

Step-by-step guide for managing PC cards.

Viewer Operation

Projecting Slides (Viewer)

How to display slides from a PC card using the Viewer function.

Auto Play Mode

Configuring automatic slide playback settings.

Switching Input Modes

Seamlessly switching between input sources and Viewer slides.

Viewing Digital Images

Conditions and methods for viewing digital images.

Storing Images via Capture

Capturing projected images and saving them to PC card.

Deleting Captured Images

How to remove captured image files from the PC card.

Using PC Card Files

Managing and displaying files stored on PC cards.

Using On-Screen Menu

Basic Menu Operations

How to navigate and use the projector's on-screen menus.

Customizing the Menu

Personalizing menu items by selecting features.

Menu Structure

Advanced Menu Overview

A visual representation of the projector's menu hierarchy.

Advanced Menu Options

Setup Options Configuration

Configuration settings for projector operation and display.

Projector Options Configuration

Settings related to 3D Reform, Wall Color Correction, and Lamp.

LAN Mode Settings

Configuration for network connectivity and IP address settings.

Mail Settings

Setup for email alerts and notifications.

Status Monitoring

Viewing current projector status and network information.

Security Settings

Options for password protection and projector security.

Menu Interface Elements

Understanding Menu Interface

Explanation of common GUI elements found in projector menus.

Menu Descriptions and Functions

Entering Alphanumeric Characters

How to input text using the on-screen software keyboard.

Source Selection

Choosing the active input source for projection.

Using the Entry List

Managing and selecting registered input signals.

Entry List Commands and Image Settings

Editing Entry List Commands

Functions for managing and editing input signal entries.

Picture Adjustments

Settings for brightness, contrast, color, hue, and sharpness.

Sound Adjustments

Controls for volume, bass, and treble levels.

Image Options (Aspect Ratio)

Selecting the best aspect ratio for the projected image.

Image Adjustments and Settings

Masking Unwanted Area (Blanking)

How to mask portions of the screen image.

Adjusting Position and Clock

Manual adjustment of image position, clock, and phase.

Selecting Resolution

Activating or deactivating Advanced AccuBlend for resolution.

Selecting Overscan Percentage

Adjusting overscan percentage for signals.

Selecting Video Filter Level

Reducing video noise using filter levels.

Selecting Noise Reduction Level

Reducing video noise with noise reduction levels.

Signal Type Selection

Choosing between RGB and Component signal types.

Picture Management

Adjusting neutral tint for yellow, cyan, or magenta.

Projector Options and Settings

Gamma Correction Mode

Selecting gamma correction modes for image optimization.

Color Correction

Adjusting tint for red, green, blue, and other colors.

Color Temperature and White Balance

Adjusting color temperature and white balance for image accuracy.

Base Setting Selection

Using color correction or gamma values as reference for images.

Using 3D Reform

Correcting trapezoidal distortion for rectangular images.

Adapting Color Correction

Automatic Wall Color Correction

Using the image sensor for automatic color correction on walls.

Manual Wall Color Correction

Manually adjusting color correction using a white paper.

Menu Configuration

Selecting Menu Language

Choosing the on-screen menu language from seven options.

Selecting Menu Mode

Choosing between Basic, Custom, or Advanced menu modes.

Customizing the Menu

Personalizing menu items by selecting features.

Selecting Pointer Icons

Choosing icons for the projector and USB mouse pointers.

Source Display and Message Settings

Configuring input source display and message visibility.

Selecting Menu Color

Choosing between color and monochrome menu display modes.

Setup Options

Projector Orientation

Adjusting image orientation for different projection setups.

Background Settings

Setting a blue screen or custom logo as the background.

RGB OUT Terminal Settings

Determining which RGB source outputs during Idle mode.

Closed Caption Settings

Configuring modes for superimposed text display.

Viewer Options

Settings for PC card folder lists, auto playback, and intervals.

Capture Options

JPEG compression quality settings for the capture function.

Mouse Settings

Configuring USB mouse button and sensitivity.

Operation Mode Select

Setting the operating mode for the USB mouse connection.

Setup Options

Selecting Signal Format

Manually selecting video standards for Video and S-Video inputs.

Auto Start and Power Management

Configuring automatic startup and power saving features.

Power Off Confirmation and 3D Reform Save

Settings for power off confirmation and saving 3D Reform adjustments.

High Speed Fan Mode and Built-in Speaker

Options for fan speed control and muting built-in speakers.

Idle Mode and Filter Usage Reset

Settings for Idle mode and resetting filter usage meter.

Auto Adjust Function

Automatically adjusting image position, clock, phase, and resolution.

Setup Options

Remote Sensor Settings

Enabling or disabling remote sensors for wireless operation.

S-Video Mode Select

Selecting the S-Video signal detection mode for aspect ratio.

Communication Speed Settings

Setting the baud rate for the PC Control port.

Default Source Select

Setting the projector's default input source on startup.

Cabinet Button Lock

Enabling or disabling the control panel key lock function.

Lamp Mode and Type Settings

Selecting lamp brightness modes and specifying lamp type.

Screen and Auto Functions

Aspect Ratio and Screen Position

Adjusting aspect ratio and vertical position for screen display.

Auto Functions Configuration

Enabling and configuring Auto Focus, Wall Color Correction, and 3D Reform.

Setting LAN Mode

IP Address Configuration

Setting the projector's IP address and subnet mask.

Network Type and SSID

Configuring wireless network type (Infrastructure, Ad Hoc) and SSID.

DNS Configuration

Setting the IP address of the DNS server for network access.

Network and Mail Settings

WEP Configuration

Setting WEP keys for wireless network encryption.

Mail Alert Settings

Configuring email notifications for projector status and errors.

Status and Password Settings

Viewing Network Status

Displaying current IP address, subnet mask, and MAC address.

Setting a Password

Establishing passwords for menu and logo access.

Security Features

Enabling Projector Security

Activating security using keywords or PC cards for protection.

Registering and Managing PC Cards

Registering and deleting PC card data for security key function.

Tools and Help

Using Sleep Timer

Setting the projector to automatically turn off after a specified time.

Using Capture Feature

Capturing projected images and saving them to PC card.

Using PC Card Files

Managing and displaying files stored on PC cards.

Using ChalkBoard

Drawing messages on the projected image.

Accessing Help and Information

Getting online help and viewing projector status information.

Returning to Factory Default

Resetting all settings to their factory default values.

Maintenance

Replacing the Lamp

Step-by-step instructions for replacing the projector lamp.

Cleaning and Maintenance

Cleaning or Replacing the Filter

How to clean or replace the projector's air filter.

Cleaning the Cabinet and Lens

Procedures for cleaning the projector's exterior and lens.

Troubleshooting

Power Indicator Status

Interpreting the projector's power indicator light conditions.

Status Indicator Status

Understanding the projector's status indicator light codes.

Lamp Indicator Status

Interpreting the projector's lamp indicator light conditions.

Common Problems and Solutions

Troubleshooting guide for common projector issues and their resolutions.

Specifications

MT1075 Projector Specifications

Technical details and performance data for the MT1075 model.

MT1065 Projector Specifications

Technical details and performance data for the MT1065 model.

Appendix

Cabinet Dimensions

Physical dimensions of the projector unit.

D-Sub RGB Input Connector Pin Assignments

Pinout details for the D-Sub RGB input connector.

Compatible Input Signal List

List of supported input signals, resolutions, and refresh rates.

PC Control and Cable Connections

PC Control Codes

Codes for controlling projector functions via PC.

Using the Software Keyboard

Interface for text input using the on-screen keyboard.

Cable Connection Details

Information on communication protocols and cable requirements.

PC Control Connector (D-SUB 9P)

Pinout diagram for the PC control connector.

Operation Using an HTTP Browser

HTTP Browser Operation Overview

Introduction to controlling the projector via a web browser.

Preparation for Browser Operation

Steps to prepare for browser-based projector control.

Handling Browser Addresses

Accessing the projector via hostname or IP address.

HTTP Server Structure

Overview of the projector's web interface structure.

TravelCare Guide

TravelCare Services

Overview of services offered for international travelers.

Warranty Terms and Outlets

Details on warranty conditions and service station locations.

List of TravelCare Outlets

Contact information for international service stations.