E-60
SPECIFICATIONS
This section provides technical information about the MT1075 Projector's performance
Model Number MT1075
Optical
LCD Panel 1.0" p-Si TFT active-matrix with Micro Lens Array
Resolution 1024⳯768 pixels up to UXGA with Advanced AccuBlend
Lens Motorized zoom and focus:
F1.74 – 2.18 f=30.8mm – 41.6mm
Lamp 300 W DC standard / 160 W DC (Optional Extended life lamp)
Color Image Sensor 23,040 pixels (160 dots⳯144 lines)
Image Size 25 inches – 500 inches (0.6 m – 12.7 m) diagonal
Projection Distance 2.96 ft – 51.23 ft / 1.0 m (Tele) – 15.6 m (Wide)
Projection Angle Tele : 10.3° – 10.7° Wide : 13.7° – 14.4°
Electrical
Inputs 2 RGB (D-Sub 15 Pin/BNC⳯5), 1 DVI, 1 S-Video, 1 Video, 2 PC Card,
3 Stereo Mini Audio, 2 (L/R) RCA Audio, 1 PC Control, 1 (L/R) RCA Audio
Outputs 1 RGB, 1 Stereo Mini Audio
USB Port 1 A Type, 1 B Type
Video Compatibility NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM, HDTV:1080p, 1080i, 720p, 576p, 576i, 480p, 480i
(w/optional cable)
Scan Rate Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over) / Vertical: 48 Hz to 120 Hz
Video Bandwidth RGB: 80 MHz (-3dB)
Color Reproduction 16.7 million colors simultaneously, Full color
Horizontal Resolution NTSC / NTSC4.43/PAL/PAL-M/PAL-N/PAL60: 600 TV lines
SECAM: 350 TV lines
RGB: 1024 dots (H)⳯768 dots (V),
External Control RS232, IR, USB, LAN (optional)
Sync Compatibility Separate Sync / Composite Sync / Sync on G
Built-in Speakers 5W⳯2 (stereo)
Power Requirement 100 - 240V AC, 50 / 60 Hz
Input Current 4.3A
Power Consumption 1.0W in Standby mode/14W in Idle mode/415W in Lamp Normal mode/345W in Lamp Eco mode
(250W in use of the optional Extended Life lamp)
Mechanical
Installation Orientation: Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear
Dimensions 13.2" (W)⳯4.5" (H)⳯12.7" (D)
334mm (W)⳯115mm (H)⳯323mm (D)
(not including protrusions)
Net Weight 13.0 lbs / 5.9 kg
Environmental Considerations
Operational Temperatures
: 32° to 95°F (0° to 35°C), 20% to 80% humidity (non-condensing)
Storage Temperatures : 14° to 122°F (-10° to 50°C), 20% to 80% humidity (non-condensing)
Regulations UL/C-UL Approved (UL 60950, CSA 60950)
Meets DOC Canada Class B requirements
Meets FCC Class B requirements
Meets AS/NZS CISPR22 Class B
Meets EMC Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3)
Meets Low Voltage Directive (EN60950, TUV GS Approved)
For additional information visit:
US : http://www.necvisualsystems.com
Europe : http://www.neceurope.com/
Global : http://www.nec-pj.com/
LCD panels are inherently susceptible to pixel defects.
For additional information regarding pixel data, please contact your local NEC sales office.
The specifications are subject to change without notice.
To Next Page
Loading...
