NEC MultiSync 75F - Multisync 95 F

English-16
Unlimited number of Colours
31 kHz to 96 kHz
55 Hz to 160 Hz
640 x 480 @ 60 to 160 Hz
800 x 600 @ 55 to 153 Hz
832 x 624 @ 55 to 144 Hz
1024 x768 @ 55 to 120 Hz
1152 x 875 @ 55 to 105 Hz
1280 x 1024 @ 55 to 89 Hz
1600 x 1200 @ 55 to 76 Hz
356 mm
267 mm
AC 100 - 240V, 50 – 60 Hz
444 (W) x453 (H) x455 (D) mm
22.0 kg
0 °C to +35 °C
30% to 80%
0 to 3000 m
-20 °C to +60 °C
10% to 90%
0 to 13700 m
2.2 A @ 100 - 240V
Monitor Specifications
Picture Tube Diagonal:
Viewable Image Size:
Display Colours Analog input:
Synchronization Range Horizontal:
Vertical:
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Active Display Area Horizontal:
(Factory setting) Vertical:
Power Supply
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Humidity:
Altitude:
Storage Temperature:
Humidity:
Altitude:
Input Signal Video:
Sync:
Current Rating
MultiSync 95F
48.3 cm (19 inch)
45.8 cm (18 inch)
ANALOG 0.7 Vp-p/75 Ohms
Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Notes
90° deflection, 0.25 mm trio
dot pitch, medium short
persistence phosphor,
multi-layered, anti-static
screen coating, semi-tint
screen, Invar Shadow Mask
and OptiClear screen.
Depends on display card
used.
Automatically
Automatically
Some systems may not
support all modes listed.
NEC-Mitsubishi Electronics
Display cites recommended
resolution at 85 Hz for
optimal display performance.
Dependent upon signal
timing used, and does not
include border area.
NOTE: Technical specifications are subject to change without notice.
366 mm
274 mm
Active Display Area
(Full scan)
Dependent upon signal
timing used, and does not
include border area.