English-16
VOLUME
Controls the volume of the speakers or headphones.
To mute the speaker output select Audio icon and touch INPUT/RESET key.
BRIGHTNESS
Adjusts the overall image and background screen brightness.
Touch INPUT/RESET key to enter [ECO MODE].
ECO MODE OFF: Sets brightness variable from 0% to 100%.
ECO MODE1: Sets brightness 70%.
ECO MODE2: Sets brightness 30%.
NOTE: When [DV MODE] is [ON], [ECO MODE] is set to [OFF] and cannot be changed.
CONTRAST
Adjusts the image brightness in relation to the background.
To enter the [DV MODE] setting, touch the INPUT/RESET key.
DV MODE: Setting that adjusts the brightness by detecting the screen’s black areas and optimizes it.
NOTE: [OFF] is used for TCO Certificate compliance.
AUTO CONTRAST (Analog input only)
Automatically adjusts the image displayed for non-standard video inputs.
AUTO ADJUST (Analog input only)
Automatically adjusts the image position, the [H.SIZE] and [FINE] settings.
LEFT/RIGHT (Analog input only)
Controls horizontal image position within the display area of the LCD.
DOWN/UP (Analog input only)
Controls vertical image position within the display area of the LCD.
H. SIZE (Analog input only)
Adjusts the horizontal size by increasing or decreasing the setting.
FINE (Analog input only)
Improves focus, clarity and image stability by increasing or decreasing this setting.
COLOR
Six color presets (9300 / 7500 / sRGB / USER / NATIVE / L/B) select the desired color setting.
NOTE: You can directly change to [L/B] (LOW BLUE LIGHT MODE) by touching the SELECT key for 3 seconds
or more.
For changing to other settings from [L/B] mode, touch the SELECT key to show OSD menu and enter
[COLOR].
When [L/B] is selected in [COLOR] control, [CONTRAST] and [DV MODE] are disabled.
RED
Increases or decreases [RED]. The change will appear on screen.
GREEN
Increases or decreases [GREEN]. The change will appear on screen.
BLUE
Increases or decreases [BLUE]. The change will appear on screen.
TOOL
Selecting [TOOL] allows you to get into the sub menu. See page 17.
OSD TOOL
Selecting [OSD TOOL] allows you to get into the sub menu. See page 18.
To Next Page
Loading...
Need help?
General