NEC MultiSync E658 - Page 44

English - 41
Video and Music Operations
• Selectlesusingthe
p
,
q
,
t
,
u
buttons of the remote
control and press the
button to start playback.
Press the
button to pause the playback.
• To pause the playback using the OSD menu, select
.
Select
to resume the playback.
• Select
to start fast forward.
FF2X
,
FF4X
,
FF8X
,
FF16X
,
FF32X
(The sound is not output.)
(FF32Xcanbeselectedonlywhenavideoleisplayed.)
• Select
to start fast backward.
FB2X
,
FB4X
,
FB8X
,
FB16X
,
FB32X
(The sound is not output.)
(FB32Xcanbeselectedonlywhenavideoleisplayed.)
• Select
or press the button of the remote control
toreturntothepreviousle.
• Select
or press the button of the remote control
toreturntogotothenextle.
• Select
or press the button of the remote control to
stop the playback.
Repeat play
Repeatsettingcanbeconguredforleplayback.The
following modes can be selected.
N
- Repeat off
• Noselectedles.
-Alllesinthefolderareplayedonce,inthesorted
order.
• Oneormoreselectedles.
-Anylesyoucheckedareplayedonce,inthesorted
order.
1
-Repeatonele
• -Aleisplaying:thecurrentleplaysonaloop.-No
leisplaying:thehighlightedleinthefolderplaysona
loop.
• Oneormoreselectedles.
Therstcheckedleinthesortedorderplaysonaloop.
A
-Repeatallles
• Noselectedles.
-Alllesinthefolderareplayedonaloop,inthesorted
order.
• Oneormoreselectedles.
-Theselectedlesareplayedonaloop,inthesorted
order.
Other functions
• Select toviewtheplaylistofles.
Youcanalsoselectthelestoplayfromthelist.
• Whilealeisbeingplayed,select
to show
informationonthelebeingplayed.
NOTE • Only use USB mass storage class devices.
• We cannot guarantee to support all
commercially-available USB mass storage
devices.
• Do not use a USB hub.
• Do not use a multi-partition USB storage
device.
• The USB Type-A port of the monitor
supports 5 V / 500 mA. When using a
USB device of more than 500 mA, we
recommend using the AC adapter supplied
with the USB device.
• When connecting a USB device formatted
as FAT16 or FAT32 to a computer, a
messagepromptingyoutoscanandx
the USB device may appear. If that occurs,
execute“Scanandx”.