English - 78
Control Settings
Control Settings
Control Interface NOTE Only one method, LAN or RS-232, can be used at the same time.
LAN Sets network (LAN) control.
RS-232C Sets RS-232C control.
Network Settings Conguresthenetworksettingsofthemonitor.
DHCP
On
Obtains the network settings from the DHCP server on the network.
Off
Setsxednetworkssettings.
Manual DNS
Obtain the network settings from the DHCP server on the network but the DNS
is set manually.
IP ADDRESS Set the IP address of the monitor when [DHCP] is set to [Off].
SUBNET MASK Set the subnet mask for the network to which the monitor is connected when [Off] is selected
for [DHCP].
DEFAULT GATEWAY Set the default gateway for the network to which the monitor is connected when [Off] is
selected for [DHCP].
DNS PRIMARY Enter the IP address of the primary DNS server of the network connected to the monitor.
NOTE Enter [0.0.0.0] to delete the setting.
DNS SECONDARY Enter the IP address of the secondary DNS server of the network connected to the monitor.
NOTE Enter [0.0.0.0] to delete the setting.
MAC ADDRESS Showsthemonitor’sMACADDRESS.
This cannot be changed.
SAVE Saves the settings.
Monitor ID Sets an ID number for control.
The monitor ID number can be set between 1 and 100.
Reset Network Settings Returns the network settings to their default values.
To Next Page
Loading...
Need help?
General