NEC MultiSync E868 User Manual

English - 57
Commands
Connecting the monitor to a computer via RS-232C or to a network via LAN allows for the transmission of commands to the
monitor, providing remote control of the monitor from a connected device. Instructions for each command format can be found in
“External_Control.pdf” in our Website (see “Appendix B External Resources” page 68).
RS-232C Interface
Item Details
PROTOCOL RS-232C
BAUD RATE 9600 [bps]
DATA LENGTH 8 [bits]
PARITY NONE
STOP BIT 1 [bit]
FLOW CONTROL NONE
Network (LAN) Interface
Item Details
PROTOCOL TCP
PORT NUMBER 7142
COMMUNICATION SPEED AUTO setting (10/100 Mbps)

NEC MultiSync E868 Specifications

General

Brand	NEC
Model	MultiSync E868
Category	Monitor
Language	English