Specifications
10
Monitor MultiSync
®
M500
™
Notes
Specifications Monitor
Picture Tube Diagonal: 15 inch 90° deflection, 0.25 mm mask pitch,
Viewable Image Size: 13.8 inch CromaClear
®
CRT, medium-short persistence
Radius: 1080 mm phosphor, multi-layered, anti-static screen
coating, semi-dark-tint screen, Invar Shadow
Mask and OptiClear
®
screen surface.
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Positive
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Display Colors Analog input: Unlimited number of Colors Depends on display card used.
Synchronization Horizontal: 31 kHz to 69 kHz Automatically
Range Vertical: 55 Hz to 120 Hz Automatically
Maximum Resolution 1280 x 1024 @ 65 Hz
Maximum resolution based on horizontal
and vertical frequemcies.
Resolutions Supported 640 x 480 @ 60 to 120 Hz
Some systems may not support
Resolution based on
horizontal and
800 x 600 @ 55 to 110 Hz
all modes listed.
vertical frequencies only
832 x 624 @ 55 to 110 Hz
1024 x 768 @ 55 to 85 Hz
1152 x 870 @ 55 to 75 Hz
1280 x 1024 @ 55 to 65 Hz
Active Display Area Horizontal:
260 mm/10.2 inches Dependent upon signal timing used,
(Factory Setting) Vertical:
195 mm/7.7 inches and does not
include border area.
Active Display Area
280 mm/11 inches Dependent upon signal timing used,
(Full Scan)
210 mm/8.3 inches and does not
include border area.
Power Supply
AC 100 – 120 V, 50/60 Hz
Current Rating 1.8A @ 100
–
120 V
Dimensions
372 mm (W) x 406 mm (H) x 405 mm (D)
14.6 inches (W) x 16 inches (H) x 15.9 inches (D)
Weight 15.0 kg
33.1 lbs
Environmental Considerations
Operating Temperature: 10°C to +35°C
Humidity: 30% to 80%
Feet: 0 to 10,000 Feet
Storage Temperature: -20°C to +60°C
Humidity: 10% to 90%
Feet: 0 to 45,000 Feet
NOTE: Technical specifications are subject to change without notice.
78133441 6/24/98, 7:50 AM12
To Next Page
Loading...
