4
OSM
™
buttons on the front of the monitor function as follows:
Main Menu Sub-Menu
EXIT Exits the OSM controls. Exits to the OSM main menu.
CONTROL Moves the highlighted Moves the highlighted area
/ area up/down to select up/down to select one of the
one of the controls. controls.
CONTROL Moves highlighted Moves the bar in the + or –
+/– area left/right to select direction to increase or
one of the controls. decrease the adjustment.
PROCEED Has no function. Only executes control
or enters sub, sub-menu.
RESET/ Resets all the controls within Resets the highlighted control
MUTE the highlighted menu to the factory setting.
to the factory setting.
NOTE: When RESET is pressed in the main and sub-menu, a warning window
will appear allowing you to cancel the reset function.
NOTE ON OSM does not need to be activated to operate the mute function
MUTE for the speakers. To quickly turn off the sound of the speakers,
BUTTON: simply press the MUTE button. To disable the mute function and
restore the sound, press the MUTE button again.
Speaker Controls
Volume: Increases or decreases the sound output of speakers/headphones.
Treble: Increases or decreases the treble.
Bass: Increases or decreases the bass.
Balance:
Adjusts the balance between the right and left speakers/headphones.
For additional sound controls, please see the Tools icon.
Brightness/Contrast Control
Brightness: Adjusts the overall image and background screen brightness.
Contrast: Adjusts the image brightness in relation to the background.
Degauss: Eliminates the buildup of stray magnetic fields which alter the correct
scan of the electron beams and affect the purity of the screen colors, focus and
convergence. When activated, your screen image will jump and waver a bit as
the screen is demagnetized.
Caution: Please allow a minimum of 20 minutes to elapse between uses of the
Degauss Control.
Controls
78133441 6/24/98, 7:50 AM6
To Next Page
Loading...
