EasyManuals Logo

NEC MultiSync V554 User Manual

NEC MultiSync V554
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
English-62
Reduced Footprint: Provides the ideal solution for environments with superior image quality.
SPECTRAVIEW ENGINE: This system is designed for improvement the visual quality of the monitor.
Each monitor is calibrated at the factory. By making automatic adjustments during operation of the monitor hardware in real
time, optimal settings are configured without any user interaction.
Natural Color Matrix: Combines Six-axis color control and the sRGB standard. Six-axis color control permits color adjustments
via six axes (R, G, B, C, M and Y) rather than through the three axes (R, G and B) previously available. The sRGB standard
provides the monitor with a uniform color profile. This ensures that the colors displayed on the monitor are exactly the same as
on the color printout (with sRGB supporting operating system and sRGB printer). This allows you to adjust the colors on your
screen and customise the color accuracy of your monitor to a variety of standards.
sRGB Color Control: A color management standard which allows for color matching on computer monitors and other
peripherals. The sRGB standard, which is based on a calibrated color space, allows for optimal color representation and
backward compatibility with other common color standards.
OSD (On-Screen-Display) Controls: Allows you to quickly and easily adjust all elements of your screen image via easy to use
on-screen menus.
Plug and Play: The Microsoft
®
solution with the Windows
®
operating system facilitates setup and installation by allowing
the monitor to send its capabilities (such as screen size and resolutions supported) directly to your computer, automatically
optimizing display performance.
IPM (Intelligent Power Manager) System: Provides innovative power-saving methods that allow the monitor to shift to a
lower power consumption level when on but not in use, saving two-thirds of your monitor energy costs, reducing emissions and
lowering the air conditioning costs of the workplace.
FullScan Capability: Allows you to use the entire screen area in most resolutions, significantly expanding image size.
VESA Standard (FDMIv1) Mounting Interface: Allows you to mount the monitor to any VESA standard (FDMIv1) third party
mounting arm or bracket. NEC recommends using mounting equipment which complies with TÜV-GS (Germany) and/or UL1678
standard (North America).
DVI-D: The digital-only subset of the DVI standard ratified by the Digital Display Working Group (DDWG) for digital connections
between computers and monitors. As a digital-only connector, analog support is not provided with a DVI-D connector. As a DVI-
based digital only connection, only a simple adapter is necessary for compatibility between DVI-D and other DVI-based digital
connectors such as DFP and P&D. The DVI interface of this monitor supports HDCP.
ZOOM: Expands/reduces the image size in horizontal and vertical direction.
Self-diagnosis: If an internal error should occur, a failure state will be indicated.
USB hub: Allows the connection of digital cameras, scanners, keyboards and more.
HDCP (High-bandwidth Digital Content Protection): HDCP is a system for preventing illegal copying of video data sent over
a digital signal. If you are unable to view material via the digital input, this does not necessarily mean that the monitor is not
functioning properly. With the implementation of HDCP, there may be cases in which certain content is protected by HDCP and
might not be displayed due to the decision/intention of the HDCP community (Digital Content Protection, LLC).
Option board slot: You can use an option board. Please contact your supplier for detailed information.
DICOM Sim.: A DICOM gamma curve emulation which is stored inside the monitor as fixed Look Up Table values. When
selecting DICOM Sim., these values are loaded into the active Look Up Table of the monitor to create a DICOM like gamma
correction curve. Suitable for DICOM image viewing in clinical review. Must not be used for DICOM image viewing in
diagnostics.
TILE MATRIX, TILE COMP: Shows one image over multiple screens with accuracy while compensating for bezel width.
Features

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC MultiSync V554 and is the answer not in the manual?

NEC MultiSync V554 Specifications

General IconGeneral
Power consumption (standby)- W
Power consumption (typical)120 W
Portrait modeYes
Annual energy consumption175 kWh
Panel life- h
Pixel pitch- mm
Response time8 ms
Display diagonal55 \
Display brightness500 cd/m²
Display technologyLED
Vertical scan range24 - 85 Hz
Horizontal scan range31.5 - 91.1 kHz
LED backlighting typeEdge-LED
Display number of colors1.073 billion colors
Display diagonal (metric)138.78 cm
Active display area (W x H)1209.6 x 680.4 mm
Internal memory1 GB
Processor cores4
Processor modelA53
Processor familyARM Cortex
Processor frequency1.2 GHz
Audio formats supportedMP3, WAV
Image formats supportedJPG, PNG
Video formats supportedFLV, MOV, MP4
Internal storage capacity16 GB
USB version2.0
USB ports quantity5
DisplayPorts quantity3
Ethernet LAN data rates10, 100 Mbit/s
VGA (D-Sub) input ports1
Purpose-
Operating hours (hours/days)24/7
Product colorBlack
Product designDigital signage flat panel
Bezel width (bottom)14.2 mm
Panel mounting interface300 x 300 mm
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)20 - 80 %
CertificationC-tick; CE; EMC Class B; FCC; PSB; TÜV GS; UL/C-UL or CSA; VCCI
Sustainability certificatesRoHS, ENERGY STAR
RMS rated power20 W
Cables includedAC, DVI
Weight and Dimensions IconWeight and Dimensions
Depth62.9 mm
Width1244 mm
Height714.8 mm
Weight24500 g

Related product manuals