NEC NP-M403X - 053-10. Lens Profile Set ]

54
3.28 [ 053-10. LENS PROFILE SET ]
Selects the profile number of the reference lens memory.
Command
02h 27h 00h 00h 01h <DATA01> <CKS>
Data part
Item Description
DATA01 Profile number
00h Profile 1
01h Profile 2
Response
4 When the command succeeds
22h 27h <ID1> <ID2> 02h <DATA01> <DATA02> <CKS>
Data part
Item Description
DATA01 Profile number
00h Profile 1
01h Profile 2
DATA02 Execution result
00h Ended successfully.
01h Ended with an error.
4 When the command fails
A2h 27h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS>