NEC NP2150 - Introduction to the Projector

16
3. Connecting LAN Cable
Connect a LAN cable to the LAN port (RJ-45) of the projector when connecting the projector to
wired LAN.
After connecting LAN cable to the projector, set the required settings for the projector
(
next page).
WIRELESS
USB(LAN)
WIRELESS
LAN
Server
HUB, etc.
LAN cable
(commercially available)
3. Connecting LAN Cable
NP3150NWSETUP-01.pm65E 9/26/07, 11:14 AM16