NEC NP2150 - Wired LAN

28
4-3. Wired LAN
When connecting a LAN cable to the LAN port of the projector, configure the LAN settings in the
“WIRED” page of “NETWORK SETTINGS” selected from On-Screen Menu.
■ Flow of setting
1
3
Step Display "WIRED" page of "NETWORK SETTINGS".
4
Step Input "IP ADDRESS".
Input "SUBNET MASK".
Input "GATEWAY".
2
Step Select "PROFILES".
5
Step Input "DNS CONFIGURATION".
6
Step Reconnect the network.
7
Step Finalize the setting.
Step Enable or disable "DHCP".
If "Disabled" (without check mark)
If "Enabled" (with check mark)
4. Setting the LAN Setting of Projector
NP3150NWSETUP-01.pm65E 9/26/07, 11:14 AM28