17
4. Setting the LAN Setting of Projector
Reference
For how to turn on/off the power to the projector and how to operate the buttons and
remote control of the projector, refer to “User’s Manual” included in the User’s Manual
CD-ROM.
4-1. Displaying On-Screen Menu (NETWORK SETTINGS)
Preparation:
Turn on the power to the projector and project images to the screen.
It is not necessary to select the signals.
1
Press the button.
The on-screen menu will be displayed.
2
Use the button to select the Setup submenu.
3
Press the button.
The “BASIC” tab will be highlighted.
4. Setting the LAN Setting of Projector
Setting the LAN Setting of Projector
4
NP3150NWSETUP-01.pm65E 9/26/07, 11:14 AM17
To Next Page
Loading...
