Need help?Do you have a question about the NEC NP2000 and is the answer not in the manual?
General| Projection distance | 0.89 - 20.9 m |
|---|---|
| Vertical scan range | 48 - 120 Hz |
| Horizontal scan range | 15 - 100 kHz |
| Projection technology | LCD |
| Projector native resolution | XGA (1024x768) |
| Resolution | 1920 x 1080 pixels |
| RS-232 ports | 1 |
| Dimensions (WxDxH) | 399 x 358 x 150 mm |
| Power requirements | 200-240 V AC; 50/60 Hz |
| Connectivity technology | Wired |
| Lamp type | NSH |
| Lamp power | 300 W |
| Light source type | Lamp |
| Service life of light source | 2000 h |
| Focus | Manual |
| Focal length range | 24.4 - 32.5 mm |
| Full HD | Yes |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Noise level | 35 dB |
| Display diagonal | 0.8 \ |
| Power consumption (typical) | 435 W |
Weight and Dimensions| Weight | 7300 g |
|---|
Covers essential safety warnings, electrical shock prevention, and warnings about rain/moisture.
Details RF interference for USA, installation guidelines, fire/shock precautions.
Explains how to connect various sources like PCs, Macs, VCRs, and audio equipment.
Provides instructions on powering the projector on/off and selecting the input source.
Details methods for adjusting image size, focus, tilt, and keystone correction.
Provides instructions for cleaning the projector and replacing the lamp.
Lists common projector problems and provides solutions, including indicator messages.
To Next Page
