31
5. Setting the LAN Setting of Personal Computer
([Example] Wireless LAN of Windows Vista: Ad Hoc connection)
5
([Example] Wireless LAN of Windows Vista: Ad Hoc connection)
If you are not connected to a network, the following window will be displayed.
3
Click
3
Click [Connect to a network].
A list of the networks you are able to connect to will be displayed.
4-2
4-1
Click
Click
4
From the list, click the SSID of the projector you want to connect to (“NECPJ”
in this example), and click [Connect].
A screen for entering the Security key will be displayed.
5
Enter the key that you set in the WEP field on the projector (“NECDS” in this
example).
5
Click
6
Click
6
Click [Connect].
Setting the LAN Setting of Personal Computer
NP3150NWSETUP-01.pm65E 9/26/07, 11:14 AM31
To Next Page
Loading...
