NEC NP2150 - 3. Projecting an Image (Basic Operation); Turning on the Projector

36
5
Click [Use the following IP address:], and input [IP address]and[Subnet mask].
• If, for example, the [IP address] and [Subnet mask] of the projector are set as show in “Example of
settings for projector” on page 34, set the personal computer as shown below.
• Example of setting the IP address and subnet mask.
Projector ( page 34)
192.168.100.10
255.255.255.0
IP Address
Subnet Mask
Personal computer(Screen Below)
192.168.100.20
255.255.255.0
5 -2
5 -1
Click
Input
6
Click [OK].
A property window for wireless network connections will be displayed.
7
Click the [Wireless Networks] tab.
8
Click [Use Windows to configure my wireless network settings], display the
check mark ( ) and click [OK].
8-2
8-1
Click
Click
Click
7
6. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows XP: Ad Hoc connection)
NP3150NWSETUP-01.pm65E 9/26/07, 11:14 AM36