40
Reference
If the above menu is not displayed, follow these steps.
(*Example when Windows Vista is used)
1. Click [Start] of Windows.
2. Click [All programs] → [Accessories] → [Run].
3. In the [Open:] field, enter the CD-ROM drive name *1 (e.g., “Q:\”) followed by
“SETUP.EXE” (e.g., “Q:\SETUP.EXE).
*1 The CD-ROM drive name will vary depending on your personal computer’s configuration.
4. Click [OK].
The menu will be displayed.
7. Refer to “User’s Guide” and Help
NP3150NWSETUP-01.pm65E 9/26/07, 11:14 AM40
To Next Page
Loading...
