5. Using On-Screen Display
90
Select from the following:
Normal
Power-saving
Note:
The HTTP server functions are not available during Power-saving mode.
The MONITOR OUT function is not available during Power-saving mode.
Control through the PC Control connector and LAN mode is not available during
Power-saving mode. For PC control and LAN mode of the projector it is recom-
mended to leave the projector in the Normal mode.
Normal mode: Power indicator: Orange light
Status indicator: Green light
Power-saving mode: Power indicator: Orange light
Status indicator: Off
PC Control
This function enables you to select the path for PC Control (see r PC Control Codes
and Cable Connections on page
128).
Note:
In the LAN mode, Communication Speed function is not available.
Select from the following:
PC CONTROL
LAN
To Next Page
Loading...
