5. Using On-Screen Display
92
Options
The Options tab contains miscellaneous setup menu settings such as Power Manage-
ment and Default Source Select and can be accessed by using the Setup Menu.
The following table lists all functions with a description and the default setting.
ITEM DESCRIPTION
Auto Start
Set this item on to enable the projector to power up when AC plug in.
Range: on or off (see page
93).
Power
Management
Select the amount of time the projector remains idle before powering
down.
Range: Off, 0:05, 0:10, 0:20, 0:30 (see page
93)
Screen
Trigger
Set this item to On to enable the projector to automatically lower the pro-
jection screen when powering on.
Range: on or off (see pages
94 and 130).
Fan Mode
Select Fan Mode.
Range: Auto or High (see page
94).
Default
Source Select
Select the default source for projection.
Range: Last, Auto, Computer1, Computer2, Computer3, Component,
Video, S-Video (see page
94).
To Next Page
Loading...
