NEC NP4001/NP4000 - Picture and Video Adjustments

5. Using On-Screen Display
66
q Source Menu Descriptions and Functions
The Source menu displays all supported image sources.
Select the required source from the menu using ▲ or ▼ and press Enter to confirm.
ITEM DESCRIPTION
Computer 1
Select the source connected to the Computer 1 input
(see
Connecting Your PC or Macintosh Computer on page 31).
Computer 2
Select the source connected to the Computer 2 input
(see
Connecting Your PC or Macintosh Computer on page 31).
Computer 3
Select the source connected to the Computer 3 input
(see
Connecting Your PC or Macintosh Computer on page 31).
Component
Select the source connected to the Component input
(see
Connecting Your DVD Player with Component Output on
page
34).
Video
Select the source connected to the Video input
(see
Connecting Your VCR or Laser Disc Player on page 35).
S-Video
Select the source connected to the S-Video input
(see
Connecting Your VCR or Laser Disc Player on page 35).
Note:
If an XGA signal is not correctly recognized on NP4001, set "WXGA Mode" to Off.
(see page 72).
To check if the signal is recognized, go to "Source" under "Information" menu.
(see page 97)