©NEC Display Solutions, Ltd. 2014-2017 43
Response
When the command succeeds
22h 18h <ID1> <ID2> 01h <DATA01> <CKS>
Data part
Item Description
DATA01 Execution result
00h Ended successfully.
FFh Ended with an error.
When the command fails
A2h 18h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS>
Information
While the lens is being driven, you can control the lens position without a stop by issuing the same command.
To Next Page
Loading...
