NEC Solutions (America), Inc.
Visual Systems Division
61XR3 Installation Guide
61” Plasma Display v1.1
Contents
Product Description and Notes Page 1
Ventilation Requirements
Page 2
www.necvisualsystems.com 61XR3 Page 1 of 10
Display Dimensions
Front, Top & Bottom
Page 3
Rear, Left & Right Side
Page 4
Display Dimensions w/Optional Speakers and Stand
Page 5
Dimensions w/Optional Flat Wall Mount
Page 6
Dimensions w/Optional Tilt Wall Mount
Page 7
Dimensions w/Optional Ceiling Mount
Page 8
Connections
Page 9
Control Codes
Page 10
Product Description
Type: Plasma Display Screen Surface: Anti-Reflective
Resolution: 1365x768 Color Correction: NEC CCF (Capsulated Color Filter, in panel)
Aspect Ratio: 16:9 and AccuCrimson (in front filter)
FCC: Class B Dimensions: 57.9”(W) x 34.7”(H) x 4.7”(D)
DVI Input: HDCP capable Weight: 134.5 lbs
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the display and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched
horizontally to fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Maximum Tilt Angles
Below is the maximum angle that the display can be tilted
Max Tilt
Landscape 30°
To Next Page
Need help?
General