Option
Description
Aspect Ratio
You can select the aspect ratio (display proportions) according to your video signal type or
personal preference. You can select from Wide, Zoom and Normal .
Selects a desired picture mode. You can select from Standard, Vivid, Mild and Custom.
Standard: Select for a normal picture.
Vivid: Select for a bright and vivid picture.
Mild: Select for a finely detailed picture.
Custom: The picture quality you set.
Note: To quickly change the picture mode, press the Picture button repeatedly.
Wide: Displays a full-screen(16:9) picture. (Works only in 4:3 analog programs)
Zoom: Magnifies the picture while maintaining correct screen proportions.
Note: You can press the Wide button repeatedly to select a desired aspect ratio.
Normal: Displays a 4:3 picture. (Works only in analog programs)
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Advanced
(Color Temperature)
Adjusts image contrast.
Customizing the Picture
Picture Adjustment
1
3
Press MENU and the main menu screen displays.
Within the menu, press 5,6,3,4 to navigate through the options
or adjust an option. Press OK to confirm a selection or enter a sub-
menu.
Press 3/4to select Video menu, press 6 to access the menu.
2
Adjusts screen brightness for easier viewing of dark picture such as night scenes and black hair.
Adjusts color saturation.
Adjusts tint for image.
Adjusts image sharpness and displays a sharp image.
Selects one of three automatic color adjustments. Sets to Warm to enhance hotter colors
such as red, or set to Cool to see less intense colors with more blue. You can select from
Warm, Cool and Normal.
Note
=
Tint is only for NTSC system.
=
Menu item that is not selectable is grayed out.
=
Select “Advanced” and then press OK to set “Color Temperature”.
Video Audio Setup Rate System Display
Aspect Ratio
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Advanced
Wide
Custom
77%
50%
50%
50%
50%
20
To Next Page
Loading...