NEC RSC1711 - Sleep Mode Settings; Sleep Mode Auto Control

(3) Sleep Mode-Auto Control Setting
( LED lamp ON)
• The Sleep Mode will be operated at a low fan
speed(Cooling) or a med. fan speed(Heating)
for quiet sleeping.
In Cooling mode
• The set temperature will be automatically
raised by 1°C 30 minutes later and by 2°C 1
hour later for comfortable sleeping.
• To cancel the Sleep Mode, press the button
several times until star pictograph on the
operation display disappears.
— 14 —
RESET
p.m.
Hr.
ON
OFF
SET CANCEL
Remote Control
Press the Sleep Mode Auto
Button.
1. Press the Sleep Mode Auto Button and set
the time to turn off.
2. Check that the Sleep Mode Auto LED of
the room air conditioner has lighted.
3. The Timer is programmed by 1 hour each
pressing the sleep mode auto button from
1 hour to 7 hours.
Beep, Beep