NEC RSC1711 - Operation Details; Soft Dry Operation Mode Specifics; Auto Air Mode Operation Details

(7) Operation Details
• Soft Dry Operation Mode
When the room temperature is higher than the set temperature, it operates cooling mode, the set fan
speed (if AUTO mode, then med.), and then it will switch to Soft Dry Operation Mode when the room
temperature reaches the set temperature.
In Soft Dry Operation Mode, the indoor fan speed is automatically switched to low.
• Auto Air
For fresh cooling more than other modes.
Press the Indoor Fan Speed Selector and set to Auto Air mode.
The Air flows from medium to low speed, or reversely by the room temperature.
The set temperature goes up by time automatically.
This mode economizes power consumption and prevents over-cooling (below Fig).
— 19 —
SET TEMP. +1°C
SET TEMP. -0.5°C
ROOM
TEMP
INDOOR
FAN
COMP.
OPERATING START
OPERATE
OPERATE
FOR
10MINS
STOP
FOR
7 MINS
STOP
FOR
7 MINS
OPERATE
FOR
10MINS
SET
FAN
SPEED
¡ªLOW COOL
OPERATION
¡ª
LOW COOL
OPERATION
COOLING
ROOM TEMP.
SOFT DRY
1HOUR
1 /
2HOUR
1
0.5°C
0.5°C
Room Temp.
AUTO AIR MODE OPERATION