(5) Remote Controller Preparation
How to store the remote controller
— 7 —
1
Pull the left and the right side to open the
front panel upward.
2
Store the remote control.
3
Press the left and the right side to close
the front panel.
1
Use the screws to secure the holder to
the wall.
Confirm that the remote
control signals can reach
the signal receptor of unit.
2
To attach the remote controller to the
holder.
3
To remove.
1
Remove the battery cover from the remote
controller.
• Slide the cover according to the arrow
direction.
2
Insert the two batteries.
• Be sure that the (+) and (-) directions are
correct.
• Be sure that both batteries are new.
3
Re-attach the cover.
• Slide it back into position.
• Do not use rechargeable
batteries, such batteries
differ from standard dry
cells in shape, dimensions,
and performance.
• Romove the batteries from
the remote controller if the
air conditioner is not going
to be used for some long
time.
How to insert batteries
(Remove for use.)
How to mount onto a wall
To Next Page
Loading...
