Press the Forced Operation Button.
•Press the Forced Operation Button
once again to stop operation.
Operation procedures when the remote controller
can't be used.
Open the front panel upward and press the Forced
Operation Button.
If you want to stop operation, press again. During Forced
operation, the operating conditions are automatically set
as follows:
FORCED OPERATION
— 20 —
Helpful information
Airflow speed and cooling capacity
The cooling capacity indicated in the specification is the
value when the fan speed is set to high, and the capacity
will be lower at low or medium fan speed.
High fan speed is recommended when you wish to cool the
room quickly.
Forced
Operation Button
High
Speed
Open the front
panel upward
Heat pump Model
Cooling Model
Room Temp ≥ 24°C 21°C < Room Temp ≤ 24°C Room temp < 21°C
Operating mode Cooling Cooling Soft Dry Heating
FAN Speed High High Soft Dry Rule High
Set Temp. 22°C 22°C Air Intake Temperature. 24°C
To Next Page
Loading...
