NEC SL1100 - Chapter 1 Introduction to Desktop Applications; SECTION 1 INTRODUCTION; SECTION 2 OVERVIEW

18
Soft Key
Indication
Feature Next Operation after pressing Soft Key
Dir Directory Dialing Refer to Page 6 for Directory Dialing operation.
Page Paging Press “InPg” (Internal Paging) or “ExPg” (External Paging), and
dial the Group/Zone number to page.
Pkup Call Pickup Press “Pers” for Extension Call Pickup.
Press “ExPg” for External Paging pickup.
Press “InPg” for Internal Paging pickup.
VM:00 Mailbox Access Refer to Page 16 (VM Soft Key).
Barg Barge-In Dial the target extension number to barge in.
Save Saved Number Dial Saved number is dialed automatically. Wait for answer.
2-8 TUE 3:03PM
Dir Page Pkup More
2
-
8
TUE 3:03PM
VM:00 Barg Save More
Press
“More”
to switch
 Soft Key Operations during Off-Hook condition
Soft Keys Operation
When you press the Speaker Key or lift the handset you will see the following Soft Keys.
 Soft Key Operations during Intercom Calling
2-8 TUE 3:03PM
Calling 216
MW Voice Rls More
2
-
8
TUE 3:03PM
Calling 216
VMsg Camp More
During Intercom calling (called party does not answer yet) you will see the following Soft Keys.
Press
“More”
to switch
Soft Key
Indication
Feature Next Operation after pressing Soft Key
MW Message Waiting Message Waiting is set. Hang up to finish.
Voice
(Signal)
Intercom Call Mode Switching
(Signal / Voice)
Signal -> Voice : Start to talk after beep tone.
Voice -> Signal : Wait for called party answer.
Press “Voice” (or “Signal”) again to switch Call Mode, if
necessary.
Rls Hang Up
- - -
VMsg Leave a Message (In-Mail)
(Option)
Start recording your message.
Camp Camp On / Callback Camp On
Wait for the system to call you back without hanging up.
Callback
Hang up and wait for the system to call you back.