5
Placing Calls
Place an Outside Call <Quick Access>
Telephone Number
? ? ? ?
Place an Intercom Call <Dial Access>
Extension Number
? ? ?
Trunk Key
Listen to the Dial Tone before dialing a Telephone Number.
You can have function keys for Trunks or Trunk Groups. Ask your NEC Authorized Supplier for the details.
Place an Outside Call <Access by Code>
7
Speaker
0 4
Telephone Number Trunk Access Code
? ? ?
(e.g. : 005 = Trunk No.5)
?
? ? 9# ?
Trunk Group No.
Trunk No.
To change the Trunk Access Code, ask your NEC Authorized Supplier for the details.
Listen to the Dial Tone before dialing a Telephone Number.
If the Trunk Group number is greater than 10, you should enter 2 digits (e.g. 11 : Group 11) after dialing
“704”. Ask your NEC Authorized Supplier for the details.
Ask your NEC Authorized Supplier for the Trunk Number dialing digits.
Speaker
Your call will ring or voice-announce. If you hear ringing, wait for an answer. If you hear a beep, begin
speaking. Dialing “1” changes voice/ring mode (if the destination is Multi-line Terminal).
9
To Next Page
Loading...
