Chapter 3 Operation Settings
121
Enables the command for all OS types (default).
RPLPLATFORM=WN
Enables the command only for the Windows volumes.
RPLPLATFORM=A2
Enables the command only for the ACOS-2 volumes.
[RETRY] section
Specifies operations regarding retry performed when the execution of the iSMrc_mount
command fails.
•
••
• Retry operation specification of the
iSMrc_mount command
MOUNTRTCOUNT=count
In count, specify the number of retries of the iSMrc_mount command.
The default value is 3.
MOUNTRTTIME=time
In time, specify the retry time interval of the iSMrc_mount command in second.
The default value is 3 seconds.
•
••
• Retry operation specification of the iSMrc_umount command
Specifies operations regarding retry performed when the execution of the iSMrc_umount
command fails.
UMOUNTRTCOUNT=count
In count, specify the number of retries of the iSMrc_umount command.
The default value is 3.
UMOUNTRTTIME=time
In time, specify the retry time interval of the iSMrc_umount command in second.
The default value is 3 seconds.
[SCAN_WAITTIME] section
Specifies operations regarding the iSMrc_scan command.
•
••
• Waiting operation specification of the
iSMrc_umount command
Specifies the waiting time for issuing the iSMrc_scan command.
RPLSCAN_WAITTIME=time
Specifies the waiting time after executing the scan command in seconds.
If RPLSCAN_WAITTIME is not specified, the default value is 30 seconds.
[SEPARATE] section
Specifies operation performed when the iSMrc_separate command is executed.
To Next Page
Loading...
