NEC Storage Manager - Page 22

Chapter 2 Command Reference
17
-ve Disk Array Name [LD Name]
Displays the relations for the disk arrays specified by Disk Array
Name, sorted by the logical disk name as the key.
If LD Name is specified, the relation only for the specified logical disk
name is displayed.
-l [Special File | LD Name]
Displays the relations for the logical disk, VAA, and special file.
If Special File or LD Name is specified, the relation only for the
specified special file or logical disk name is displayed.
-r Creates the list of the logical disks, VAAs, and special files.
When a disk array has been added or deleted, or a logical disk has
been bound or unbound, be sure to execute this command to re-create
the volume list.
On the UNIX system HP-UX version, the system checks the disk
array currently being connected and creates a character special file for
the SCSI access.
-help Displays the usage of this command (UNIX).
[ DISPLAYED INFORMATION ]
Volume list information is displayed.
# iSMvollist -l special_file_name
LDN LD NAME VAA TYPE
Special File Disk Array Path
ldn ld name VAA type
special_file_name disk_array path
#
Description of messages
LDN Logical disk number
LD NAME Logical disk name
VAA Volume Absolute Address
TYPE OS type
Special File Special file name
Disk Array Disk array name
Path Availability of special file
Available: No display