Chapter 2 Command Reference
18
Unavailable: ‘B’ is displayed
[ USAGE ]
(1) This command creates the volume list.
# iSMvollist -r
iSMvollist: Info: iSM11700: Please wait a minute.
iSMvollist: Info: iSM11100: Command has completed successfully.
#
(2) This command displays volume list information by specifying the special file.
# iSMvollist -l /dev/rdsk/c1t2d0
LDN LD NAME VAA TYPE
Special File Disk Array Path
0001h disk001 30000000000000020000 NX
/dev/rdsk/c1t2d0 NECStorage4100/07
#
[ NOTES ]
• While the volume list is being created or updated, it is not possible to create, update or display
the volume list or to conduct operations by replication operation commands.
• On the UNIX system HP-UX version, while the iSM Server is running on the same server, the
volume list can be displayed, but cannot be created or updated.
[ RETURN VALUE ]
0: Normal termination
1: Abnormal termination
[ ERRORS ]
This command terminates abnormally in the following cases.
• A parameter is invalid.
• The instruction fails due to a disk array error.
To Next Page
Loading...
