Chapter 2 Command Reference
40
-rv volume Specify volume of RV.
For information about the volume and volume types, refer
to 1.2 “Volume Types”.
-rvflg rv_flg Specify the volume type specified in -rv.
This argument must be specified if -rv is specified.
For information about the volume and volume types, refer
to 1.2 “Volume Types”.
-cprange copy_range Specify the range of copy from RV to MV.
In copy_range, one of the following can be specified.
diff Restore only updates to MV since Separate
from RV to MV.
full Restore all area from RV to MV.
If this argument is omitted, the operation is the same as
the operation when diff is specified.
-cpmode copy_mode Specify how to reflect the MV update to RV.
In copy_mode, one of the following can be specified.
sync Sync mode
semi Semi-sync mode
bg Background copy mode
If this argument is omitted, the operation is the same as
the operation when sync is specified.
If the RV protection restore is carried out, this argument
specification becomes invalid.
-rvacc rv_access Specify the access restrictions for RV.
In rv_access, one of the following can be specified.
ro Only read is allowed for RV.
nr Access to RV is not allowed.
If this argument is omitted, the operation is the same as
the operation when nr is specified.
To Next Page
Loading...
