Chapter 2 Command Reference
54
-mvflg mv_flg Specify the volume type specified in -mv.
This argument must be specified with -mv.
For information about the volume and volume types, refer
to 1.2 “Volume Types”.
-rv volume Specify volume of RV.
For information about the volume and volume types, refer
to 1.2 “Volume Types”.
-rvflg rv_flg Specify the volume type specified in -rv.
This argument must be specified if -rv is specified.
For information about the volume and volume types, refer
to 1.2 “Volume Types”.
-file file_name To specify multiple pairs, describe the pairs of MV/RV in
file_name.
The copy operation instruction is specified in the
argument. If multiple pairs are specified, a copy request
is issued to the pairs simultaneously, and the operation
instruction is reflected to all the pairs.
For the description format of file_name, refer to 1.3
“Replication Operation File”.
When multiple pairs are specified, if an error occurs in
some pairs, an error message indicating that is displayed,
and the process is continued until it is terminated in all
the specified pairs.
-? Displays the usage of this command (Windows).
-help Displays the usage of this command (UNIX).
To Next Page
Loading...
