NEC Storage Manager - 5.4 Access Control Installation

Chapter 2 Command Reference
55
[ DISPLAYED INFORMATION ]
On the Windows system
(1) Information when the command terminates normally with -suspend specification is
displayed.
(Individual specification)
C:\>iSMrc_change -suspend -mv ld_name -mvflg ld -rv ld_name -rvflg ld
Change Start YYYY/MM/DD hh:mm:ss
MV:disk_number ld_name type
volume name
path
RV:disk_number ld_name type
volume name
path
Change Normal End YYYY/MM/DD hh:mm:ss
MV:disk_number ld_name type
volume name
path
RV:disk_number ld_name type
volume name
path
C:\>
Description of messages:
• Change Start YYYY/MM/DD hh:mm:ss
Change Copy Control State starting message and Start Time
• MV:disk_number ld_name type
volume name
path
• RV:disk_number ld_name type
volume name
path
MV/RV physical disk number, logical disk name, OS type, mount point volume
name, and drive letters mounted to the folder of the NTFS volume accessed by
users
• Change Normal End YYYY/MM/DD hh:mm:ss
Change Copy Control State end message and end time
On the UNIX system
When the command terminates normally with the -suspend specification, the following
information is displayed.
(Individual specification)
# iSMrc_change -suspend -mv special_file_name -mvflg sfn -rv
special_file_name -rvflg sfn