NEC Storage Manager - Page 67

Chapter 2 Command Reference
62
-file file_name To specify more than a pair of volumes, specify the
volume names for file_name.
For the description format of file_name, refer to 1.3
“Replication Operation File”.
If multiple pairs of volumes are specified and an error
occurs in a pair of volumes, the system does not
discontinue operation. The system continues operation
until processing for all the specified pairs of volumes is
completed.
The following shows the usage of the wait command:
-? Displays the usage of this command (Windows).
-help Displays the usage of this command (UNIX).
[ DISPLAYED INFORMATION ]
On the Windows system
(1) The following information is displayed when the command is executed to wait for a pair of
volumes in Replicate Execution to enter the Sync State:
C:\> iSMrc_wait -mv ld_name -mvflg ld -rv ld_name -rvflg ld -cond sync
Waiting.....
Replicate Normal End YYYY/MM/DD hh:mm:ss
MV:disk_number ld_name type
volume name
path
RV:disk_number ld_name type
volume name
path
C:\>
Description of messages:
• Waiting.....
Message during execution of the wait command for Sync State
The display of this message can be suppressed by setting an option. For details
on the option setting, refer to 3.1 “Replication Operation Option Setting File”.
• Replicate Normal End YYYY/MM/DD hh:mm:ss
Replicate end message and end time
• MV:disk_number ld_name type
volume name
path
• RV:disk_number ld_name type
volume name
path