NEC Storage Manager - Page 71

Chapter 2 Command Reference
66
On the UNIX system
(1) When the command is executed to wait for a pair of volumes currently in Replicate
execution to enter the Sync State, the following information is displayed.
# iSMrc_wait -cond sync -mv ld_name -mvflg ld -rv ld_name -rvflg
ld
Waiting.....
Replicate Normal End YYYY/MM/DD hh:mm:ss
MV:special_file_name LD Name type
RV:special_file_name LD Name type
#
Description of messages:
• Waiting.....
Message that appears during execution of the wait command for Sync State
The display of this message can be suppressed by setting an option. For details
of the option setting, refer to 3.2 “Environment Variables”.
• Replicate Normal End YYYY/MM/DD hh:mm:ss
Replicate end message and end time
• MV:special_file_name LD Name type
• RV:special_file_name LD Name type
MV/RV’s special file name, logical disk name, OS type
(2) When the command is executed to wait for a pair of volumes currently in Restore execution
to enter the Sync State, the following information is displayed.
# iSMrc_wait -cond sync -mv ld_name -mvflg ld -rv ld_name -rvflg
ld
Waiting.....
Restore Normal End YYYY/MM/DD hh:mm:ss
MV:special_file_name LD Name type
RV:special_file_name LD Name type
#
Description of messages:
• Waiting.....
Message that appears during execution of the wait command for Sync State
The display of this message can be suppressed by setting an option. For details
of the option setting, refer to 3.2 “Environment Variables”.
• Replicate Normal End YYYY/MM/DD hh:mm:ss