NEC Storage Manager - Page 72

Chapter 2 Command Reference
67
Restore end message and end time
• MV:special_file_name LD Name type
• RV:special_file_name LD Name type
MV/RV’s special file name, logical disk name, OS type
(3) When the command is executed to wait for a pair of volumes currently in Separate execution
to enter the Separated State, the following information is displayed:
# iSMrc_wait -cond sep -mv ld_name -mvflg ld -rv ld_name -rvflg
ld
Waiting.....
Separate Normal End YYYY/MM/DD hh:mm:ss
MV:special_file_name LD Name type
RV:special_file_name LD Name type
#
Description of messages:
• Waiting.....
Message that appears during execution of the wait command for Separated state
The display of this message can be suppressed by setting an option. For details
of the option setting, refer to 3.2 “Environment Variables”.
• Separate Normal End YYYY/MM/DD hh:mm:ss
Separate end message and end time
• MV:special_file_name LD Name type
• RV:special_file_name LD Name type
MV/RV’s special file name, logical disk name, OS type
(4) If 3,600 seconds is set as a wait time limit and Separate is not completed in 3,600 seconds,
the wait command displays the following error message and information, and terminates
abnormally.
# iSMrc_wait -cond sep -mv ld_name -mvflg ld -rv ld_name -rvflg
ld -limit 3600
Waiting.....
iSMrc_wait: Error : iSM13658 : Wait command has terminated because
it has reached the time limit which is specified by the limit
option. (3600 sec)
Wait Abnormal End YYYY/MM/DD hh:mm:ss
MV:special_file_name LD Name type
RV:special_file_name LD Name type