Chapter 2 Command Reference
68
#
Description of messages:
The following is displayed as an error message.
iSMrc_wait: Error : iSM13658 : Wait command has terminated
because it has reached the time limit which is specified by
the limit option. (3600 sec)
• Waiting.....
Message that appears during execution of the wait command for Separated state
The display of this message can be suppressed by setting an option. For details
of the option setting, refer to 3.2 “Environment Variables”.
• Wait Abnormal End YYYY/MM/DD hh:mm:ss
Wait-command abnormal end message and end time
• MV:special_file_name LD Name type
• RV:special_file_name LD Name type
MV/RV’s special file name, logical disk name, OS type
[ USAGE ]
On the Windows system
With 1 second specified as the monitoring interval in the -interval option, the command is
executed to wait for Separated State.
C:\>iSMrc_wait -mv dev001 -mvflg ld -rv dev002 -rvflg ld -cond sep
–interval 1
Waiting.....
Separate Normal End 2001/01/28 17:56:23
MV:1 dev001 WN
\\?\Volume{69facee0-58a7-11d5-ad3e-806d6172696f}\
G:
RV:2 dev002 WN
-
-
C:\>
On the UNIX system
With the monitoring time interval of one second, the command is executed to wait for Separated
state.
# iSMrc_wait -cond sep -mv disk001 -mvflg ld -rv disk002 -rvflg ld
-interval 1
Waiting.....
To Next Page
Loading...
