Chapter 2 Command Reference
74
Description of messages:
• MV: Special File, LD Name, Type
Displays the MV’s special file name, logical disk name, and OS type.
• RV: Special File, LD Name, Type
Displays the RV’s special file name, logical disk name, and OS type.
• Activity State
Indicates the activity state.
replicate Replicate state
restore Restore state
restore (protect) Restore state with the RV protection specification
separate Separate state
• Sync State
Indicates the pair operation state.
separated Separated
sep/exec Separate execution
cancel Separate state (forced separate)
fault Separate state (fault separate)
rpl/sync Replicate complete
rpl/exec Replicate execution
rst/sync Restore complete
rst/exec Restore execution
• Copy Control State
Indicates the Copy Control State.
When Restore with the RV protection specification is executed, the updated data
of the MV is not reflected into the RV. Therefore, the information of Copy
Mode (foreground copy or background copy of the synchronous copy mode and
the semi-synchronous copy mode) is invalid and “-” is displayed.
foreground copy (sync) Foreground copy state (synchronous copy mode)
foreground copy (semi) Foreground copy state (semi-synchronous copy mode)
normal suspend Suspend state
abnormal suspend Suspend state (fault)
background copy Background copy state
freeze Freeze state
• <state> Start Time, <state> End Time
Indicates the start and end times of the last replication operation (Replicate,
Restore, or Separate) executed. If an error or Forced Separate has occurred, the
time of its occurrence is displayed.
The <state> shows “Replicate”, “Restore”, “Separate”, “Fault”
(for fault), or “Forced Separate” (for Forced Separate). When “Fault” or
“Forced Separate” is displayed, the End Time does not appear.
To Next Page
Loading...
