Line Keys
Programmable Function Keys
To Program a Line key as a Programmable Function Key:
1. Press the Speaker key.
2. Dial Service Code 751.
3. Press the Line Key to be programmed.
4. Dial the code for the desired feature plus additional
data if required from list on page 18.
5. Press Hold.
6. Press Speaker to hang up.
Note 1: Service Code 00 will erase the function from the key.
Note 2: In some cases, the Hold key needs to be pressed before
pressing the Speaker key.
continued
BACK 17
Customer Care Group
1.877.GO.OPTUS
To Next Page
Loading...
