NEC SV8100 - Page 11

NEC SV8100 Dterm User Guide
11
Making Calls, Continued
Automatic
Callback
(N/A if
called
extension
has
Voicemail)
When you call an extension that is engaged, you may set an
automatic callback. This means when the extension becomes free,
your phone will ring.
To set a callback
1. Dial an extension
2. Press  then press CAMP button below screen
3. Hang up
When the extension becomes free, your phone will ring with a
distinctive ringing tone. Once you answer the call, you will hear
ringing tone to the other extension.
Last
Number
Redial
or
Redial Last
10 Numbers
To dial the last number you called.
1. Press REDIAL #
1. Press REDIAL until you find the desired number
2. Press # to dial or pick up the handset or press speaker
Speed Dials
To dial system speed dials (depending on how many speed dials
you have)
1. Press REDIAL or Dial 9
2. Dial the 3 digit code eg. (000-999)
To dial personal speed dials (see page 18 to program)
1. Dial *9 and the 2 digit code eg. 0 to 9
Conference
Calls
You may have up to 2 external calls on a conference call. If both
parties are external, you should make sure you are the last person
to hang up, otherwise they may continue on with the conference
call.
1. You are talking with the first caller.
2. Press the CONF (the caller goes on hold)
3. Make another call (remember to dial 1 for an outside line if
making an external call)
4. When the called party answers, Press ADD to bring called
party in
5. Press BEGIN to join parties together to start conference OR to
bring in another party, repeat from step 3.
Internal callers will be displayed on your keyphone screen.
The MIC will work as a mute key when using speakerphone or
handset.